How To

Install Window Film

It’s As Easy As 1, 2, 3

Follow our step-by-step instructions of how to apply static cling and self adhesive privacy film. Printable instructions are also available.

Download Printable Guide

STEP 1

Clean and Dry Your Glass Surface

Using glass cleaner, thoroughly clean your window, door, or sidelight

Wipe your glass surface dry using paper towels

Surface must be sprayed with water for both static cling and self-adhesive window film

STEP 2

Spray Glass Surface with Water

Spray glass surface with water

Ensure surface is thoroughly wet

Surface must be sprayed with water for both static cling and self-adhesive window film

STEP 3

Remove Backing and Apply to Glass

Begin to remove window film's protective backing

Apply window film to glass starting at the top

Slowly remove backing and smooth film onto the glass with your hand

Tip: Use a piece of tape to help remove the protective backing if backing is semi-transparent or gives you difficulties with peeling off

Step 4

Smooth Out Air Bubbles and Trim Excess

Using a squeegee, smooth out any air bubbles in the film
Use a craft knife to trim any excess
Alternatively, measure and precut window film to desired size

Step 5

Repeat Until Surface is Covered

Ensure coverage is to your liking
Repeat steps 3 and 4 until your glass surface is covered

Frequently Asked Questions

VIEW ALL

The clear plastic backing can be removed by inserting a fingernail or other thin object underneath, similar to removing the backing from a self-adhesive product.

How To Install Our Other Products

Ready to make your room pop?

Let’s Get Crafty

Contact Us